-
Debug level from my sensor:
airRohr: NRZ-2020-133/DE
mounting FS...
opened config file...
parsed json...
output debug text to displays...
Connecting to XXXXXXXXXX
..................SNTP synce…
-
Would that be an idea to add the multigeiger on https://kitspace.org? If it's ok for you, i would start it and add your gerbers (directly via your github) to kitspace.org and create a bill of material…
-
Using NodeMCU board HW-628.
With NRZ-2020-129 it works.
With NRZ-2020-130-B6 it doesn't work.
Symptom: after flashing NRZ-2020-130-B6, board switches to AP mode as in the documentation. User i…
-
## The devDependency [tape](https://github.com/substack/tape) was updated from `4.11.0` to `4.12.0`.
🚨 [View failing branch](https://github.com/juliuste/airrohr-prediction/compare/master...juliuste:…
-
Querying for the 24h data (https://data.sensor.community/static/v2/data.24h.json) returns empty json file.
-
I assembled a nodemcu v3-sensor, a friend who already did so multiple times flashed the firmware onto it, now I started to configure it. logged into the "Feinstaubsensor-ID" wifi, went to the config p…
-
I created a mobile, battery powered version of the DNMS Sensor with an additional OLED 1306 Display (second I2C slave). It works fine until I switch off the OLED for power saving reasons.
In this ca…
-
Hi!
I'm using about 50 feinstaub sensors but I have this recurring problem: school and universities have authenticated networks that require adding more information than just the network name and p…
-
The sensor should try to reconnect in regular intervals if WiFi is not available when starting or lost. (it looks like the WiFi SSID created by the sensor is supposed to only be around for a limited t…
jms72 updated
4 years ago
-
Hello,
I'm encountering an issue using my DNMS T4.0+NodeMCU1.4 PCB. The PCB is connected to a DNMS, a SPS30 and a BME280. While the BME280 is working fine I only get values either for the SPS30 or …