-
// Helpp, i cant configure whats wrong , for my fyp.
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
15:53:35.932 -> configsip: 0, SPIWP:0xee
15:53:35.932 -> clk_drv:0x00,q_drv:0x00,d_drv…
-
### The problem
Getting an error setting up ESP32Camera with esp-wrover-kit
[18:08:18][E][esp32_camera:123]: Setup Failed: ESP_ERR_NOT_SUPPORTED
It has worked, so it seems to be a update change…
-
Hi, I have two ESP32-A1S Audio Kit, We want to use as Intercom between two kits,
We tried this kit with default ADF example by changing the I2C and I2S pins suggested by the Ai Thinker. Listed belo…
-
Hi. I'm testing A6 module (IoT GA6), all seem to work well but not the gprsConnect function.
As you can see in document [A6 A7 A6C A20 AT instructions v1.03.pdf](https://github.com/vshymanskyy/TinyGS…
-
Hi,
I am working on a custom image sensor PCB for my master thesis and would like to know, if its possible to adjust this firmware to work with the ESP32S3WROOM and my pinout? And how would I start…
-
Compiling "EloquentSurveillance/examples/CameraCaptureExample/CameraCaptureExample.ino" [with camera.aithinker();]
results in "error compiling for board ESP32-CAM".
What could be the problem here?
-
In the [GPRS_C_SDK](https://github.com/Ai-Thinker-Open/GPRS_C_SDK) repository, I see say you can use this SDK with row chip!
```This SDK can be also applied to RDA8955 raw chip 也可直接在RDA8955芯片上运行```
…
-
Hey, I've been using this a while, and I've had to make this modification for the default (AIThinker) config to compile.
![image](https://github.com/lorow/OpenIris/assets/8168401/c297bc63-1d03-44f6…
-
May I'm to new to this. But I can't find which default_envs to build which uses env:lilygo-rtl_433.
The reason why I want to build it by myself is just because I must change the frequency: '-DCC110…
-
I'm trying to get the helloworld example running on an Ai-M62-12F-Kit. I can build and flash it, but I don't get any console output via picocom.
Building and flashing:
```
make CHIP=bl616 BOARD=b…