-
## The problem
In the (awesome) new ui, the semantic classes and semantic properties are not alphabetized in the pop-over from the "create equipment from thing" and "add items from thing" screens. …
-
Because the Egardia Woonveilig alarmsystem listens on port 80 and authentication is done over a plain HTTP request I wanted to move the Egardia system to another VLAN. Home Assistant does not like the…
-
I'm setting up a 'SecuritySystem' with 6 zones in it.
When I use the Apple HomeKit Accessory Simulator for the six zones, they appear as a single 'Tile' in the 'Home' app and there is an toggle to …
-
My Android tablet is running Android Go 8.1.0. The latest version is installed. Android Go is a stripped down version of Android that runs on cheaper tablet devices with low-spec hardware (the type of…
-
Hallo,
hoffe mein Problem löst sich schon, wenn mal ein zweites Paar Augen auf meine Konfiguration schaut.
Mein Versuch das [Security System bzw. AlarmSystem](https://github.com/thkl/homebridge-…
-
If the alarmsystem is in the state "armed_home" and a new device in "device_trackers" is detected (e.g. I active BT or wifi of my android phone)... system change the status in "disarmed".
This don't …
-
I found that if the Xiaomi Gateway is disconnected, the AlarmSystem will continue to work and send arming and disarming messages. But obviously, no alarm works.
First of all it should check if Xiaomi…
-
**Home Assistant release with the issue:**
0.100.2
**Last working Home Assistant release (if known):**
N/K
**Operating environment (Hass.io/Docker/Windows/etc.):**
Hassio
**Integrati…
-
Reboot make the component work again.
Last error message before the component stops updating is:
"Update of alarm_control_panel.visonic_alarm is taking over 10 seconds
29 januari 2020 10:45 __main_…
-
Hi Philipp, which changes you have applied to AlarmSystem configuration?
with the new alarm.py system is not armed by input_boolean like this do not works...
```
- alias: system alarm home on
…