-
Hello
So to summarize, I am attempting to make an identical keyboard to the one beautifully crafted by ProjectsWithRed, Mine however will feature only a single button and uses all the exact same co…
-
If I open a pipe like that:
var rx = radio.openPipe('rx', 0xF0F0F0F0F1, {size: '5'});
node-nrf get's the data, but does not send back ACK, my Arduino sender says that transmission failed.
This do…
-
i am using rtc DS3231 module and your library with esp32- WROOM in my project .... Sometimes, when the power gets cutoff, the time gets delayed from few minutes to hours... Now the main issue is whe…
-
HP printers have been coming with a dedicated email address that will print files emailed to it. Emailing printed files to a address could serve as de facto wireless printing.
For other printers, …
-
Hi,
I am looking into the udoo neo in order to play with LInux on the i.mx6 + FreeRTOS on the Cortex M4.
... but i would like to use upstream/mainline u-boot and kernel.
As far as I can see t…
-
Hi Michael,
I have a little question:
I am writing a little Tool that reads some values of the computer and redirect it to an arduino
For e.g. CPU temperature, CPU Load... But... I can't get the…
-
I have encounter a problem where the duino.app serial monitor is unable to receive messages after a compile and upload activity. I have a new Mega board that uses a Silicon Labs CP2102 USB to serial …
-
-
Upgraded from 5.0.1 to 5.1.0 using the web page upgrade firmware option. Hard wired ethernet stopped working. No wifi in the garage.
Esp32 gateway board is revision G
OpenEvse Ardiuno firmware …
-
Have tried to update my Tx many times but every time it gets to 100% the version changes from 1.10 to 0.00 and bricks my Tx. Any ideas?