-
```
avr-libc: 1.6.7-4.5
avr-gcc: 4.4.2
reason: EEWE bit definition is missing. apparently removed from avr/eeprom.h
offending code:
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__)
…
-
trying to compile with SH1106 OLED enabled I keep getting this error:
> Arduino: 1.8.3 (Windows Store 1.8.6.0) (Windows 10), Board: "Arduino Nano, ATmega328"
> ----------------snip--------------…
guelz updated
7 years ago
-
The encoder steps are saved to eeprom as soon as all three axes are idle. This can only happen if the Arduino is still powered. I think this is generally true whenever the Arduino is plugged into th…
-
From what I have read and in the files there is no information on programming this new card. There is no code for the eeprom.
There are no LINUXCNC configuration examples for this card nor XML files …
-
```
What steps will reproduce the problem?
I modified the sample code somewhat to show what I was getting in my
own sketch. Below is the updated sample.
/*
EDB_Simple.pde
Extended Database Libra…
-
how use embedded eeprom on the arduino uno with tinygo?
-
Moved from #1066.
I am using a [Moteino M0](https://lowpowerlab.com/guide/moteino/moteinom0/). A Moteino M0 uses a [ATSAMD21G18](https://www.microchip.com/wwwproducts/en/ATsamd21g18) processor. Whe…
-
I have EEPROM of model DS2431.
I am able to read the bit data from the eeprom using Arduino OneWire library.
I am also able to write to the eeprom.
But when I write to it I am not able to wr…
-
Hi
I have a Xbox version 1.0 and using an Arduino Uno to try and read the eeprom. I connected the wires as displayed but get a Error Reading EEPROM. I checked the wiring is making good connection. …
-
Hello,
I just intall "Visual Studio Code" to build my 3D printer firmware, I load the folder, install "PlatformIO IDE" (which install "C/C++ for Visual Studio Code").
When opening my *.h files I have…