-
Hi
my arduino client can't connect to the public broker test.mosquitto.com.
The Serial Monitor output: Connecting to MQTT... failed state : -2
Here is the code, where is the problem?I don't find i…
-
```
What steps will reproduce the problem?
1. Open up one of the Ethernet example sketches
2. Build and upload it to a Current Cost Bridge device
3. Observe the Ethernet traffic
What is the expected …
-
I'm using an arduino with ATmega2560 with Ethernet shield. I'm using version 1.3, trying to connect to a NodeJs websocket server.
On server side, I'm using [express-ws](https://github.com/HenningM/ex…
-
_From @SeanDS on August 13, 2013 22:12_
I'm using the Arduino Ethernet R3 shield with a Due board. The Ethernet shield uses the ICSP connector to communicate with the Due via the SPI socket on the Du…
-
ESP32 with connected W5500 ethernet adapter, esp platform 3 compille error
```
C:\Users\j.jirutka\Documents\Arduino\libraries\WireGuard-ESP32\src\wireguardif.c:51:10: fatal error: tcpip_adapter.h: N…
-
```
What steps will reproduce the problem?
1. Open up one of the Ethernet example sketches
2. Build and upload it to a Current Cost Bridge device
3. Observe the Ethernet traffic
What is the expected …
-
```
What steps will reproduce the problem?
1. Open up one of the Ethernet example sketches
2. Build and upload it to a Current Cost Bridge device
3. Observe the Ethernet traffic
What is the expected …
-
```
What steps will reproduce the problem?
1. Open up one of the Ethernet example sketches
2. Build and upload it to a Current Cost Bridge device
3. Observe the Ethernet traffic
What is the expected …
-
Arduino UNO v3 with DFRobot DFR0850 shield (w5500 chipset w/POE & SD card, https://wiki.dfrobot.com/Ethernet_and_PoE_shield_for_Arduino_W5500_SKU_DFR0850) using Ethernet library 2.0.2 immediately retu…
-
```
What steps will reproduce the problem?
1. Open up one of the Ethernet example sketches
2. Build and upload it to a Current Cost Bridge device
3. Observe the Ethernet traffic
What is the expected …