-
I've seen comments about snap4arduino working over wifi using `StandardFirmataWifi` for esp8266 NodeMCU but I've a simpler use-case I can't still fulfill:
I would like to make it work over USB, I use…
-
Hi,
I'm trying to get the value of a sensor on regular intervals. I try running this simple code
```
require "arduino_firmata"
arduino = ArduinoFirmata.connect "/dev/ttyACM0"
5.times do
puts ardu…
-
```
Hi,
I can't communicate with my Arduino (Duemilanove, ATmega168) with
Firmata under Linux (Arch Linux 64 bit).
I tested both "stock" Firmata that comes with Arduino IDE and
Firmata-2.1beta7.zip d…
-
https://www.arduino.cc/en/Reference/Firmata
-
```
1. Uploaded Firmata to my Arduino Mega board
2. Configured serproxy with the serial port and baud rate. Says it's waiting
for clients
3. Loaded the monitor, which connects with Serproxy. Gets stu…
-
Hi,
I found nice lib for transport Firmata protocol via MQTT: [https://github.com/monteslu/mqtt-serial](url)
How to prepare class (extend Stream) for reading from MQTT ELClientResponse, and provide d…
-
examples/test.pl is producing an error "unsupported mode '2' for pin '15' at ../lib/Device/Firmata/Platform.pm line 823."
This test was done using an Arduino Mega 2560 R3 and the StandardFirmata ske…
-
I like the idea of this project. Any reason to not strive for 100% firmata compatibility?
I've done some remoting of firmata on top of arduino and other Johnny-Five compatible hardware: http://blo…
-
It would be useful if a firmata host could enumerate attached i2c devices on a firmata client.
A full scanner is not required, just the ability to detect the error from a wire.endtransmission .
cf i…
-
StandardFirmataPlus is a variant of Firmata (for Arduinos, at least in this case) which includes extra features which require a more powerful Arduino than the basic StandardFirmata.
I'd like to tr…