-
I tried OTAA as per the instructions given by @dhineshkumarmcci . Check the given arduino log below. Node trying to join with the server and I can able see the join request on the
Chirpstack lorawan…
-
Great to see work is done to bring an LMIC-based stack back into development. I'm curious how you are planning to structure the development of this stack?
IBM used a fairly closed model, where deve…
-
After running for about an hour using a slight modification of ttn-otaa (just sending unheard join requests, the TTN gateway I'm using is disconnected), my LoRa end node hits:
`FAILURE
/.../Ardui…
-
Hi,
i'm trying to use a LoraWan library (Lmic) on [MSP430F5529LP](http://www.ti.com/tool/msp-exp430f5529lp), i got it to work on arduino uno without any problems, how ever on the MSP430F5529LP i'…
-
hello,
Im trying to use Maduino Lora Radio [(915M)](https://www.makerfabs.com/maduino-lora-radio-433m-868m-915m.html) with chripStack and mikrotik WAP LoRa9 gateway ,us 915 sub1 and I’m facing a few …
-
I am using LMIC on nRF52 platform. I have successfully ported hal.cpp and now I want to switch to using interrupts. Mainly I want to sleep while waiting for RX as that's the majority of time the libra…
-
As far I can see, the example code only tries to join on `setup()` but if the session expires (i.e. as in the case of the V2->V3 migration), the node would not be able to realize and would keep sendin…
-
**Consider raising support questions on the forum first**
There is a discussion site, [forum.mcci.io](https://forum.mcci.io), which includes a [category focused on the Arduino LMIC](https://forum.m…
-
hows send to address to another node with raw.ino?
i could not find address section
-
**Issue description**
There are some major problems with the Arduino LMIC if you sleep the system for an extended period of time.
- The Arduino microsecond timer overflows in about 71 minutes.
…