-
OpenWrt master branch
Netgear R7800 / QCA9984
Sometimes (quite rarely) the wifi does no fully come up and this time I looked at the log and saw this crash report. The logs show a crash three minu…
-
想问下您用的是哪个版本的无线驱动哈,我也是自己通过LEAN源码编译的,用的默认无线驱动ath10k-firmware-qca4019-ct,但5G无线速度最高只有270Mbps,协议速递是866Mbps。。
-
You do not need the "sizeof(ar->mac_addr)" third function here - i removed it and it compiled fine:
drivers/net/wireless/ath/ath10k/core.c: In function ‘ath10k_core_probe_fw’:
drivers/net/wireless…
-
I have found a site [1] which contains instructions on how to patch ath10k to ignore regulatory domain in EEPROM. Since I have a Qualcomm Atheros card which is affected by the problem, I tried the sol…
ghost updated
9 months ago
-
Server response: Unsupported package(s): procd-seccomp, wpad-basic-mbedtls, procd-ujail, procd
{
"url": "https://sysupgrade.openwrt.org",
"revision": "r22346-e026a65af1",
"advanced_m…
-
*timkgh:*
Netgear R7800
OpenWrt SNAPSHOT, r9559-445ca981d1
dmesg full of these errors. Kernel crashes too (reported in FS#2178), not sure if related or a different issues.
[40794.429593] ath…
-
Hi Ben.
The latest commit 8eca56d1514042b4af34004e0bbf69e40351d499 , it´s using a lot more RAM on my router,
making it useless.
TP-Link Archer C60v2, QCA9886, Openwrt Kernel 5.10.
Any idea w…
-
Hi,
I'm trying to bring up an interface in mesh mode. I'm using ath10k-ct driver and ct-firmware 10.1, specifically `firmware-2-ct-full-htt-mgt-community-21.bin` for QCA 988X. My OS is OpenWRT 18.0…
-
I've compiled this experimental USB support and tested with the Linksys WUSB6100 USB adapter (QCA9377). My purpose is for P2P testing (WiFi Display Development). The driver picks up the device and als…
-
Noticed that tags are not properly cleaned in stgit mode:
[RESEND, v4] ath10k: Fix sending NULL/ Qos NULL data frames for QCA99X0 and later
https://patchwork.kernel.org/patch/9239481/
kvalo updated
7 years ago