-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
Add new board definitions based on [this gist](https://gist.github.com/ah01/762576)
```c++
#if defined(__AVR_ATmega168__)
// Arduino Diecimila and older
LINE("__AVR_ATmega168__", __AVR…
-
When I ran setup.py it said MCUs 0 and there is only one MCU to choose from when starting an new project.
-
Most of the ATmega/ATtiny symbols end their descriptions and use footprints starting with "QFN-xx" where they should perhaps be more specific, eg. "VQFN". The problem: Atmel could not seem to decide w…
-
### Describe the problem
The Arduino language features are not available after startup.
### To reproduce
- Have no attached boards,
- Start IDE2,
- Select `Arduino Uno` board (can be any),…
-
It seems like this file: https://github.com/Rahix/avr-hal/blob/main/ravedude/src/avrdude/avrdude.conf is not compatible with AVRDUDE 7.1: https://github.com/avrdudes/avrdude/discussions/1636
You ge…
-
I think Wiki is a good start as well as `README.TXT`.
https://github.com/Optiboot/optiboot/wiki/CompilingOptiboot
https://github.com/Optiboot/optiboot/blob/master/optiboot/bootloaders/optiboot/READM…