-
Connlib utilises ICE, STUN & TURN to reliably establish a connection between client and gateway. This is achieved by creating candidates from local socket addresses and remote-allocated relay addresse…
-
Please see the discussion here: https://github.com/lilyinstarlight/nixos-cosmic/issues/105
I'm not sure if this is a packaging issue or upstream issue, but I'd appreciate any pointers to debug this…
-
Does the battery charging limit working? I have T480s i5-8350u with Ventura 13.6.6 and the battery charging liimit is not working, even already set to 80% it's still charging beyond 80% all the time.
…
-
I'm not sure if there is a better place to discuss this than the issues section? Under normal conditions, it seems the battery (smile B3) registers a discharge of around 36W when it's neither charging…
-
### Describe the bug
Hi @PatrikTrestik ,
the problem is that when I want to set the EV Charger to Enabled, it switches to Disabled.
![1](https://github.com/wills106/homeassistant-solax-modbus/asset…
-
Watchla reports incorrect battery status and range estimate.
-
Hi,
is this a not supported device?
having:
acer travelmate p259-62-m
manjaro 6.6
both
sudo insmod acer-wmi-battery.ko enable_health_mode=1
sudo insmod acer-wmi-battery.ko
end up in:…
-
MOST devices send a battery level, and these battery levels ARE stored in the database and sent to the UI, but not displayed.
Need to display battery levels on the UI per device page, or somewhere …
-
Can you add support for battery % status in app and in flows for automation purposes?
Can you add the ability to change system profile in flows?
-
I have a HYD 15KTL Inverter with 2x20kWh Battery. Everything works fine for Battery 1, but no Readings from Battery 2. Anyone else has this problem or a solution?
Thank you