-
Hi
I have too many problem with industrial version from element14 so i check for other choice.
It is possible with Beaglebone-blue to control motor stepper driver like leadshine dm556 ?
A…
-
_From @bradanlane on March 8, 2017 23:28_
## Environment data
VS Code version: 1.10.2
Python Extension version: tested 0.5.9 and 0.6.0
Python Version: local: windows 3.5.3 remote: raspbian 3.4…
-
Pocket Beagle with sensor cape and WIFI on a TP-LINK 722N
Boot sequence :
0-15 seconds Uboot
15 - 60 secs gets in a WAIT STATE === Does it perform a File System repair ? = same delay with or wit…
-
This happened after compiling a kernel module which hang the system and so yanked the power cable and restarted.
The host was showing "this composite device is not for us" (i.e.: HoRNDIS did not reco…
-
Sorry for opening a few issues at once!
I downloaded and flashed this image onto my rev A5C BBB: https://rcn-ee.com/rootfs/2016-05-12/flasher/BBB-eMMC-flasher-ubuntu-16.04-console-armhf-2016-05-12-2g…
-
This thread is dedicated to building Machinekit on Debian Stretch. Some defaults and package names seem to have changed. Therefore, some work might be necessary to get everything up and running.
-
Test, and configure in Venus where necessary, all IO.
IO List:
- RS485
- The three digital inputs
- VE.Can (do you have a canbus product? If not, we'll test it on this side).
- All VE.Direct …
-
Since Venus v2.00 we have a new dataAttribute, called `gatewayMachineId`. But before going any further with that, I want to align it with the rest of the Victron products. Therefor we are going to ren…
-
Hi @RobertCNelson
I use your project https://github.com/RobertCNelson/ti-linux-kernel-dev build kernel 4.9.
But I boot from tftp server. It stop at "Starting kernel .."
Do you know the reason ?
…
-
hi,
I have just installed new debian 9.1 iot on my bbb.
and I found this issue when my bonescript try to use p9_31 as GPIO_OUT :
Error: EACCES: permission denied, open '/sys/devices/platform/ocp…