-
Hello,
I am trying to run QEMU (this repository) on an arm-generic-fdt-7series. My goal for now is to get to the boot-loader, but when I run the following command:
./aarch64-softmmu/qemu-system-…
-
Thank you for your epic work!
I am using your img, it works fine except for the wifi but it is not a problem.
Also in my "MX10 Pro" (H6) it doesn't boot from emmc, while [new versions](https://githu…
-
Hi,
On our platform we are using BL2 at EL3 and have a use case where some extra firmware images need to be downloaded for initializing certain system components before control is passed to BL31. …
-
Image installed: `ubuntu-22.04.3-preinstalled-desktop-arm64-orangepi-5-plus.img.xz`
Hardware: [Orange Pi 5 Plus (32GB)](http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Ora…
-
Hey! Finally got one and here is what I found.
There is 2 UARTs. One shows complete mess due to looked bootloader (maybe I'm wrong) and another shows u-boot log. As far as I understand we need to en…
-
@kubiko
RE:
source: https://git.launchpad.net/~ondrak/+git/u-boot
source-type: git
source-tag: lf-6.1.36-2.1.0-uc
source-depth: 1
/RE:
When attempting to build the 22/imx8m…
-
### What happened
During build it fails to enable the klipper service as the klippy alias seems to already be taken apparently. I looked around and there doesn't actually seem to be anything using …
-
```
gxl_p211_v1#mmc list
SDIO Port B: 0
SDIO Port C: 1
gxl_p211_v1#mmc dev 0
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd respons…
-
### Describe the bug
Changes to `hardware.deviceTree.*` are not applied on NixOS where the device seems to defaults to the bootloader-provided one instead.
This behavior seems to be unique to Ni…
-
I took firmware-imx-7.9.bin
and I copied the following files to the u-boot-fslc
```
bl31.bin
signed_hdmi_imx8m.bin
lpddr4_pmu_train_2d_imem.bin
pddr4_pmu_train_2d_dmem.bin
lpddr4_pmu_train_1d_i…