-
Hello,when i use grgsm_livemon catch the gsm information, i meet this error
```
/home/opensourcesdr# grgsm_livemon --arg=bladerf
Warning: failed to XInitThreads()
linux; GNU C++ version 7.3.0; Boo…
-
Passing complex values with I or Q of 1.0 or greater to bladeRF-sink causes the transmitted values for _both I and Q_ to flip sign, presumably due to silent overflow of 12-bit values.
I have a blad…
-
Hi! I'm trying to build my own gsm base station on Ubuntu 18.04 with bladeRFx40. After installations of YateBTS and BladeRF; I configured Radio.Band, Radio.C0, Identity.MCC, Identity.MNC, Identity.LAC…
-
## Issue Description ##
I have a srsLTE project running with bladeRF X40. Now I want to enhance bladeRF Transmission power so I have purchased amplifier XB300. Using the wiki page I have setup the …
-
I'm trying to get SDR# to work on the BladeRF 2.0 Micro A4. I've followed all the instructions. I get SDR# to see the device but when i try to start the device after a short pause this popup shows.
…
-
I'm new to terminal and have this error when trying to compile on my Mac running Sonoma 14.3.1.
cc -I. -D_POSIX_C_SOURCE=200112L -DMODES_DUMP1090_VERSION=\"unknown\" -DMODES_DUMP1090_VARIANT=\"dum…
-
Attached is a short memo on setting up the BladeRF 2.0 Micro RF front end for GNSS-SDR. I ran into a number of issues, so perhaps this would be helpful for others that are using the BladeRF 2.0 Micro.…
-
please fix this and thanks a lot!
-
Your guide is currently not for USRP?
-DUSE_BLADERF=1 -- build for BladeRF
-DUSE_HACKRF=1 -- build for HackRF
-DUSE_OPENCL=0 -- disable OpenCL (See notes in later chapter)
-
Hello,
I built latest commit [9fc57e6] for `hosted` revision and found timing violations:
- setup in rx_clock domain
- recovery in pclk domain
See resulting [static timing analysis report (h…