-
Any updates on this?
https://github.com/makerbase-mks/MKS-Robin-Nano-V3.X/issues/73
-
I can not get BLTouch 3.1 working with R4. I have tried two different BLTouch.
I am using these settings:
[stepper_z]
step_pin: gpio19
dir_pin: !gpio18
enable_pin: !gpio17
endstop_pin: probe…
-
What do I do if I accidentally flashed the hex file with 'bootloader' in the title?
Please paste the complete output of the `M503` command here.
-
I have an Ender 3 with an SKR mini E3 V 1.2 and I recently have installed a BLTouch onto my printer. The BLTouch installed fine and I flashed the new firmware, however now when I try to auto bed leve…
-
Is there a way to customize the homing sequence with tft32?
I have a mks sbase v1.3 and a tft32 and a BLTouch clone.
To home the machine, including the Z-axis it needs several steps.
First home X a…
-
Hi.
skr mini v1.1 bltouch connections and settings how?
-
Hi, i tried this addon with an rpi and original display it works like a charm!
I modded my printer with a BLTouch for autoleveling based on marlin firmware.
It would be great if you can add contro…
-
Hi,
I'm using mk4duo 4.3.2. I have a bltouch clone. I set it up as blotuch sensor (couse if not, then it leaves the tip out when moving the next calibration point).
Sometimes when measuring a ca…
-
Nothing happens whenever i use Zmax or M5 Stop pins as servos. Only Bltouch works. But i need at least bltouch and another servo working.
I redefined pins and change num_servo to 2. no luck
-
hi, i have bltouch smart v3.1 from ( https://www.antclabs.com/bltouch-v3 )
i plug everything correctly and i changed everything in firmware correctly so when i wiring my bltouch v3.1 to mks robin nan…