-
Test the [ESP32-S2 Feather with BME280 Sensor](https://www.adafruit.com/product/5303) that has a built in temperature and humidity sensor as well as a built in battery voltage meter.
-
* [x] CPython Libraries
- https://github.com/pimoroni/bme280-python
- https://github.com/pimoroni/bmp280-python
* [x] CircuitPython Libraries
- https://github.com/adafruit/Adafruit_CircuitPy…
-
With the new hardware standard for miStepper, there are 2 external temperature sensors to be used to get the temperature of the motor.
These sensors are BME280 connected via I2C. This needs to be add…
-
These lines are redefined
1. https://github.com/alexellis/growlab/blob/d1e65558d864b112bfd98871bae1c83bbdc7ff46/bme280-logger/sender/sensors.py#L15
is redefined here
https://github.com/alexellis/gr…
-
Hi, is it possible to show IIO devices in sensors output?
Example, I2C, BME280, using kernel module `bmp280` on 0x76. Kernel: `6.1.0-rpi7-rpi-2712`, `sensors version 3.6.0 with libsensors version 3…
-
Please add BME280 temperature/humidity/pressure sensor support, using both SPI or I2C (or I2C only).
That would be very nice to support this very common sensor and add an example to use it as a dem…
-
My setup uses an SDS011 and a BME280 but the BME280 is a bit off on temp and humidity (cheap ali express)
When I enter a temperature correction value between 0.0 and -0.9, the temperature displayed i…
-
```
/home/partage/.scripts/esp/bme280-esp-idf-i2c/main/main.c:33:1: error: unknown type name 's8'
s8 BME280_I2C_bus_write(u8 dev_addr, u8 reg_addr, u8 *reg_data, u8 cnt)
^~
/home/partage/.script…
-
Le BME280 permet de mesurer la pression, la température et l’humidité dans un seul module et peut être utilisé via SPI ou I2C.
https://fr.aliexpress.com/item/GY-BME280-3-3-precision-altimeter-atmos…
-
There was previous discussion that ability to calibrate readings would be useful, as the raw readings can be some way off.
Presently, I';ve tweaked enviro/boards/grow.py as below, but it would sur…