-
![bme680 top](https://cloud.githubusercontent.com/assets/6698410/17267381/0170571a-55bc-11e6-982f-62df273703f8.jpg)
-
BME680 what is the pin out to connect it to the flipper zero?
-
As a balena-sense user for at least two years (with a long hiatus due to moving cross-country), a Raspi ZeroW with a Garden Hat breakout + BME680 was core to my method of detecting if air quality was …
-
I have a Raspberry Pi 4 wired up to an Adafruit BME680 board over the 4 cable quick connector, connected like this
![temperature___humidity_BME680_RasPi_I2C_breadboard_bb](https://user-images.github…
-
If BME280 or BME680 extension is wished for, there is no easy to find documentation.
-
### The problem
Ok, the title is kinda bad, but there are so many different points needed.
Everything works, but as soon as I add ONE of the text_sensors below, the esp fails to connect to the wif…
-
Update the sketches to use the Bosch Bsec Library (https://github.com/BoschSensortec/BSEC-Arduino-library) to get proper readings from the BME680.
-
I was looking at the dryad https://www.dryad.net/wildfiresensor sensors, and after a bit of research I got myself a bme680 and a cubecell ... I guess we had the same idea. I still didn't have the time…
abate updated
5 months ago
-
### The problem
I am not sure if this problem is related to ESPHome or Platform.io. Please let me know so I can create the problem in the correct project.
When I try to compile a firmware for th…
-
I have 2 EP1 in 2 diffrent locations of my house, as well as a bunch of other ESP based temp sensors. This issue is not related to the calibration or drift but that the sensors seems to be doing somet…