-
进入AfterEffectActivity后无法播放并导致ANR
-
The IPU3 Pipeline handler only supports 2 cameras.
This is due to the only being 2 imgu (ISP) units, even though there are 4 CIO2 receivers.
The current implementation solves this simply by assignin…
-
Hello,
I wonder why tools like `libcamera-hello` do not work with the RPi-image. The libcamera-tools missing first, but I installed them with:
`$ sudo apt install libcamera-apps
`
```
$ lib…
-
When trying to capture from camera with:
`$ v4l2-ctl --set-fmt-video=width=2112,height=1568,pixelformat=NV12 --stream-mmap --stream-count=1000 -d /dev/video3`
I get a lot of messages like these:…
-
Hello,
### Brief description:
with motioneye dev I have the problem that zobie processes remain in the system. From about 700 zobies the memory runs full and the system stops.
### Detailed desc…
-
I'm not able to listen soudcloud, use osmand for navigation and track recording and capture the with onstreetcam. On OP3T with 6GB RAM and Snapdragon 821 (lineageos 15.1)
logcat shows endless error…
-
I'm recently purchased the 4-camera adapter board v2 and 4 ov5647 cameras. I am able to run 2 cameras with the sample code, however running 3 or more cameras gives the error:
mmal: mmal_vc_componen…
-
Not an issue, merely some research which should end up in the wiki when it's done, I guess.
I took a dive into the ppsapp binary, and found a lot of endpoints the doorbell is publishing on its intern…
-
On my rock 5a I can capture video from my IMX415 camera connected to the 4 lane CSI port if I capture data from /dev/video11 which is the raw video stream. But trying to get data from /dev/video[01] (…
-
I tried out some simple code to save a picture with a rpi zero v2 and rpicam 2.1:
```
from picamera2 import Picamera2
picam2 = Picamera2()
picam2.start_and_capture_file("test.jpg")
```
And get t…