-
I am new to rust language. I have some questions regarding using CH582F chip.
I want to make an IOT project where I want to read 3 ADC pins every 5 minutes to read temperature, light level and batt…
-
If i try to install this core through Board Manager in Arduino IDE 2.x i have this error
Failed to install platform: 'CH32 MCU EVT Boards:1.0.4'. 2 UNKNOWN: Get "https://codeload.github.com/openwch…
-
Can make custom template noneos-sdk on new project ?
i need make custom template on new project have some file and function
not have int main(){ } only ?
-
Hey,
probably a hundreth issue about this problem, but few days of research are not giving me any fixes.
I'm building a project that consists of a WS2811 strip, a esp8266 (nodemcu v1) module and a s…
-
WARNING: library Servo claims to run on avr, megaavr, sam, samd, nrf52, stm32f4, mbed, mbed_nano, mbed_portenta, mbed_rp2040, renesas, renesas_portenta, renesas_uno architecture(s) and may be incompat…
-
PIO Core Call Error: "Platform Manager: ch32v@1.1.0+sha.f515d0a is already installed\r\nTool Manager: Installing git+https://github.com/Community-PIO-CH32V/toolchain-riscv-windows.git\r\ngit version 2…
-
I cannot get the Linux driver for the W-LinkE to work correctly on Ubuntu 23.04
If I set the ModeS to Serial (red LED) It seems to be OK - /dev/ttyACM0 appears..
BUT if I set it to Flash mode (blu…
-
Thanks for the useful Arduino core that you have provided. I am trying to add a variant for CH32V203RB and have made a PR https://github.com/openwch/arduino_core_ch32/pull/20 and would appreciate som…
-
Just got a CH32C0003F4P6-Ro-1v1 and a WCH-LinkE-Ro-1v1 and am attempting to upload a test sketch.
First I installed the board packed per the instructions in this repo
I have connected SWDIO to P…
-
Hi,
I'm working on WCH Ch32v305 evt board. And I have confirm EVT board works well with MountRiver.
But I can't get any serial output with Arduino.
So I want to confirm if it can work with Ch…