-
Right now, the charging algorithm is very dangerous. It's ok to connect the output to a BMS, but not to plug directly on a battery (whatever the chemistry).
It should follow charging curves and als…
-
Hi, I have Waveshare UPS HAT (D) and I have installed the latest version of this integration (downloaded from the master branch) in HA.
Using the `INA219.py` script from Waveshare, I'm getting prop…
-
Apologies if this is in the wrong place (please let me know where to post if needed).
Onewheel XR (4212/4161; cbxr; OWIE).
OWIE was working fine with some lag in showing correct battery % in one…
-
Set battery parameters
- [x] Set charging voltage min, max
- [x] Set charging current
- [x] Turn on/off microphone regulator (GPIO 0)
- [x] Turn on/off lcd power (LDO2/3)
- [ ] Explore disabling …
-
Hi, this may be off topic, but out of all your inverter integrations, this one is the most similar for the srne inverter, and some settings works better compared to the pdf protocol doc. I was able to…
-
#### Summary
Addressing the issue of current draw by certain GPIOs when enabled, with a focus on optimizing power consumption.
#### Affected GPIOs
These three GPIOs are drawing current when enabl…
-
### Parent Backlog Item
#48
### Description of new task
Create software for charging circuit with one cell.
The implementation should read voltage and current aswell as being able to change chargin…
-
Seeing an issue with the detection logic for the voltage reference.
Basically the logic grabs the voltage while the aux battery is charging sometimes.
May be a race condition whereby the voltage is …
-
Hello
I will provide my setup
- 12V lead acid battery
- 80W panel (16Voc 5A Isc)
- 13.5V charging voltage
- 3A charging current
I am facing two problems:
1. When it's charging the algorit…
-
Related to [Benjamin-Loison/android/issues/113](https://github.com/Benjamin-Loison/android/issues/113).
Charging works fine with another cable than default charger or charger base and [USB-C 3.2 Lo…