-
Dr. Zhu,
Is there anywhere I can get or buy the Retro-CM3?
-
This library is wonderful, but it'd be really handy if it were possible to replace the element properties with Quantities from Astropy's unit system if Astropy is installed (and the user explicitly re…
-
We need to add checks for radxa zero and rock CM3 here:
https://github.com/NebraLtd/hm-pyhelper/blob/8fa184c6026c5f9009fc61ea583883679fed5057/hm_pyhelper/hardware_definitions.py#L6-L11
We may al…
-
List of text editors support Modula-3:
https://github.com/modula3/cm3/discussions/1130
Scintillua lexers for Modula-2 and Modula-3:
https://github.com/paaguti/textadept-modula-lexers
ghost updated
4 months ago
-
mklib is a nuisance.
There are a few ways to improve it.
Make it a lib.
Link it to cm3.
Do all the work within cm3.
Do less of the work: Write the .def file, but do not read or write object f…
-
This was kind of a show-stopper adding filament. No spools I had seem to have this listed any place. Maybe add this generic list below to auto-populate that field if you want it a required one?
I f…
-
I have a question regarding how hounsfield density interpolation is actually implemented.
Current implementation expects user to gave the initial density for material, then Gate calculates following …
-
Hi,
After extensive debug including attempting old and new bootcode I reached this conclusion:
Boot from FAT-16:
Not possible:
- Some CM3 boards from eMMC
Possible:
- The same boards…
-
As indicated in the comments for https://github.com/libopencm3/libopencm3/pull/323 there's some somewhat unusual mixes of bool and uint32_t in the cm3/cortex.h file.
Arguably, many of the bool types …
karlp updated
8 years ago
-
I have a custom pcb similar to the cm3 io board.
I have found that I get boot loop when I update the uboot version :
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="26d3b6963ed2d2215348f1baba8b9646ed3dc6ea"…