-
It will be useful to be able to define parameters of LoRaWAN second receive window. In case of OTAA this parameter is set according to join reply of network server but in case of ABP you need to set t…
-
It will be useful to be able to define port for uplink message. Modem has AT command `AT+PORT` for that but this AT command is not supported in current SDK.
-
I will be useful be able to send confirmed message and check if message was confirmed or not (by event).
Current SDK use `AT+UTX` (unconfirmed transmission). There is also `AT+CTX` (confirm transm…
-
-
I have a TimerMillis that I'm using to blink LEDs -- it triggers every 100ms. If I do _not_ activate this timer, the the join seems to occur immediately. When it's in use, join can take several minu…
-
I'm using a B-L072Z-LRWAN1 but methods sleep() and stop() of the STM32L0 library seems to be not working. It compiles without error, but the programs just keeps running no matter what value you put in…
-
Hi,
First thanks for your Arduino Core and libraries, it's very powerful !!
I'm trying to play with STM32L082 but in LQFP32 package, which has not PB8 and PB9 for i2c. But as PB7 and PB6 are ava…
-
Will you be providing a utility to read firmware version and to allow to re-flash of new firmware version as they become available from muRata or ST-Micro??
I do see a FWUpdaterBridge.ino in the Ar…
-
Hi,
I am having a problem with the sx1276 seeming to be stuck in RF_RX_RUNNING. I am thinking that this might be caused by timing issues.
All of this results in LoRaMAC beeing stuck in LORAMAC_TX_…
-
Hello:
AssetTracker_Cricket.v02 doesn't compile with the errors
AssetTracker_Cricket.v02:717: error: 'class GNSSClass' has no member named 'wakeup'
'class GNSSClass' has no member named 'sleep'…