-
Hi,
since it updated to the new version (and adjusting the config with sensors)
all the sensors have state unknown in Home assistant
originaly I had this and that worked, I can't figureout how …
-
My MQTT broker gets a lot of unnecessary information: each second "next_fan_change" and "exhaust_fan_flow", "exhaust_fan_speed", "supply_fan_flow", "supply_fan_speed", "power_consumption_current" and …
-
Hi, I am using Lolin32 Lite with nrf905 and I seem to be unable to pair with ComfoAir E300 RF:
```
[13:18:07][D][zehnder:535]: Start discovery with ID 135
[13:18:07][D][nRF905:262]: Set TX Address:…
-
I had this issue that the esp would keep losing wifi connection until it was restarted manually. Wifi connection only lasted 1-2 of hours before it dropped.
Despite the ::WiFi.setAutoReconnect(true);…
-
INFO ESPHome 2023.10.6
INFO Reading configuration /config/esphome/comfoair.yaml...
INFO Detected timezone 'Europe/Berlin'
INFO Generating C++ source...
INFO Compiling app...
Processing comfoair (…
-
Unfortunately I can't see the Card.
I entered the following
```
type: custom:comfoair-card
entity: climate.ca350_climate
```
![image](https://user-images.githubusercontent.com/79660810/22690…
-
I have problem with occasionally drop wifi or mqtt connection. After auto reconnect esp set ventilation level to 3.
Is it depends on some test commands or?
Is there option to force send ventilation …
-
Sorry, searching did not supply an answer.
I see there is a discrepancy in commit dates between the mqtt tree and the normal tree.
Furthermore, normal tree is esphome enabled, cannot find if mqtt tr…
-
When the ESP32 is connected to the canbus I get an error on de display of the unit itself
`Comfonet error Please check cables`
I can only reset this error when I disconnect the ESP32.
While conne…
-
I used standard ESP, but dc stepdown is LM2596. Other than that is everything by manual. ESP is recognized in HA. But when I connect it to Comfoair there is an error of communication. When I try to re…
K3iVi updated
8 months ago