-
An image release request has been made for the iot-gate-imx8.
Automated testing uncovered problems with modem connectivity which are currently being investigated in internal thread https://balena.z…
-
**Bug description**
I am working with the Cog browser on an embedded custom board having iMX8 Plus CPU, working with Yocto and using previously Cog 0.14 and wpewebkit 2.38.6. There was no problem in …
-
Following the instructions in README and building the example image without any modifications has two errors and multiple warnings. Someone with more experience could maybe check these out. I'm new to…
-
Hello!
I've got a small network of Raspberry Pi 4 4GB models, all running the 2020-08-20 64-bit beta "Lite" image, and doing various jobs from being a Kubernetes cluster to supporting the cluster a…
-
When following the instructions in the readme to build `linux-compulab_v5.15.71` for `IOT-EDGE-IMX8PLUS` I get the following compile errors:
```shell
SYNC include/config/auto.conf.cmd
HOST…
-
@vraevsky I know it's not supported but was hoping to try out r2.2. I see this with a default checkout / build. Any ideas?
```
x/u-boot-compulab/2022.04-r0/git/tools/mkeficapsule.c:21:10: fatal e…
-
Hi Team,
While building with wayland target, facing below build issue.
The default yocto build passing the '-DWL_EGL_PLATFORM' options, still we facing the issue.
Hardware: imx6qsabresd
…
-
Hi there,
I've been working on a Compulab device for a while, I faced an issue with the Linux kernel, for some reason we need to have another version of the Linux kernel to be compatible with our a…
-
Is there a plan to support following blobs in kirkstone 5.15.71-2.2.0:
```
compulab/iot-gate-imx8plus-m2tpm.dtb
compulab/iot-gate-imx8plus-brkout_pwm_gpio.dtb.dtb (is this a typo?)
```
I had …
-
I have eMMC module in socket P14 but it is not possible to see the eMMC device from the Yocto build. I do not have jumper E1 set. To use extra module is it required to set the E1 jumper and boot from…