-
https://heltec.cn/ doesn't work for me, is the site down? The arduino package manager JSON file also links there and get.exe, so they all fail to work.
Can you post the binaries somewhere accessibl…
-
Example Factory project: **WiFi_LoRa_32_V2_FactoryTest**
This error happens in several lib files (not only in my main one)
#### **error: 'HELTEC_BOARD' was not declared in this scope**
And if…
-
In addition to the existing stdlib function `long random(void)` we need to implement the Arduino standard functions `long random(long max)` and `long random(long min, long max)`.
Same for `void rand…
-
I'm creating an ESP32-based LORA gateway for multiple physical sensors. I already have it working as one HA "Device" with multiple sensors, but would like to have each of the physical sensors (with t…
-
Hi,
im trying to run the example (LoRaWan_OnBoardGPS_Air530.ino) from this repo with my GPS CubCell Board HTTC-AB02S. After some hours (usually more then 12) the board stops working, which means it…
-
Hi @Heltec-Aaron-Lee @solotaker @gibus27 !
I have some issue when I set the ESP32 V2 to TTN network, my region use AS2 frequency plan (AS923-925), so when I config the `Commissioning.h` file I can'…
-
In working with the library and using it to send to an ESP based LoRa device that does not use this library, I found that this library adds 4 bytes to the start of every buffer for compatibility with …
-
I'm building a solar powered ground station, and I'm looking to have some way to monitor the state of the power system, in particular:
- Voltage of the solar panel
- Current going into the charger…
-
Running POCSAG w/ the CubeCell (AB01 V2) at 1200 BPS, the ouput isn't able to be decoded in Multimon-ng. Running a test with RPITX, it works fine.
Here's the waterfall comparison (CubeCell on the …
-
Hey,
i have configured my CubeCell device to send some data to TTN. Everything works, but I have problems with TX duty cycle.
I used an appTxDutyCycle of 120000ms (_uint32_t appTxDutyCycle = 1200…