-
I just got my Cypress EZ-USB FX3 SuperSpeed Explorer Kit and the fxload example will cause segfault under macOS.
After FW downloading the FX3 will disconect from USB and the reenumerate to be anoth…
mcuee updated
3 years ago
-
Would patches for other devices be accepted?
https://sigrok.org/wiki/Noname_LHT00SU1
https://sigrok.org/wiki/HT_USBee-AxPro
They have sigrok firmware but no gain stage and only one channel.
-
#! /bin/sh
cmake .. /home/zen/build
make -j7
strip openhantek/OpenHantek
rm -f packages/*
fakeroot make package
mv /home/zen/build/_CPack_Packages/Linux/DEB/*.deb /home/zen/build/
......
P…
zen67 updated
3 years ago
-
## Issue description
I installed NixOS on bare metal in a computer of mine this last weekend...and graphics did not work. They just stop updating after a certain point in the boot, however, the OS…
-
im using nixos nixos-unstable@916ee862e87 and nixpkgs-wayland overlay @ https://github.com/colemickens/nixpkgs-wayland/tree/fff3832d082ccc20447173fc8d75aebff94469ec
when i run sway the screen stays…
-
Hi,
After a few flashes, I can't revert the EEPROM to factory firmware anymore.
**I don't have a Glasgow** yet so I am using a FX2LP dev board ([EZ-USB FX2LP CY7C68013A](https://www.hotmcu.com/e…
-
Hi guys.
Recently I got my hands on a clone of USBee-DX device. This is combined logic analyzer and oscilloscope.
I was hoping to make it working under Linux with Sigrok PulseView software, but un…
-
The Portmaster was not able to initialize the nfqueue. This might be connected to #82 - but in that case the error later changed to not being able to initialize iptables itself.
**What happened**:
…
-
-
Hi
I am constantly getting following error :
Error Opening SMBusb: libusb error -11
both for smbusb_sbsreport and smbusb_scan
Device is enumerated as
Bus 001 Device 006: ID 04b4:8613 Cypress S…