-
I live on a boat and have a battery bank of a several Stirling LiFePO4 batteries that include the Daly SmartBMS, but only accessible by Bluetooth. I can use the SmartBMS App, but I need to monitor all…
m0jek updated
2 years ago
-
### Describe the problem
Hello,
I have the problem that the set values for max. discharging and charging are not being respected.
The system charges with full power and after a certain time the…
-
I am trying to communicate with the BMS in a battery over RS485 but do not know the protocol details. I tried to load the aia file on Kodular to find out but I get errors loading the blocks when I do …
-
Can this also edit settings on the inverters?
-
I've found that pre-charging the large capacitors on the Victron Quattro II makes a lot of sense.
You can easily do it by connecting a small resistor with 22-27 ohms, 1-2 watts in parallel to the con…
-
### Describe the problem
Hallo,
using 2 DIY Batteries in Parallel , connected via rs485 (tty0 and tty1) to victron cerbo.
Battery Agreggator
![image](https://github.com/user-attachments/assets/1…
-
Hi,
What OS will DalyLog run on? I see that several people have it running on an RPi4, would that mean it runs on Raspbian Buster with Desktop?
Many thanks
Dan
-
### Describe the bug
Battery gets disconnected in the OS. It was working fine for months.
As you can see in the logs: the soc value is None and the software terminates.
### How to rep…
-
### Describe the problem
Describe the problem
A connection problem occurs several times a day (NO BMS). after a restart everything works again. After some troubleshooting it seems the bms is goi…
-
Hi Joba,
nach langen Tüftelön mit VS Code und Platform IO habe ich Dein Skript sauber kompilieren können. Nun scheitert es bei mir an der Stelle des Uploads. Ich habe Dir dazu einmal ein Foto angef…