-
Hi and first of all thanks for your effort to rewrite the firmware and for sharing.
I got my oven and immediately i did the improvements what is recommended and updated the FW.
First i used for CJ …
-
I've previoulsy tested other feature DHT,DS1820 working so easy !!
but with Zactuator :(
I've only decommented in User_config.h this line :
#define ZactuatorONOFF "ONOFF" //ESP8266, Arduino, ESP…
-
I've build a simple ESP32 board (pin compatible with MaxESP3, but only ESP32 and 2 TMC2130 SPI V3 from Bigtreetech installed).
I want to know how to enable StealthChop mode? I tried to set TMC2130S…
-
I'm using the 2.1 adapter with attached WEMOS. As my heating does not supply VL temps for HK1 and HK2 I'd like to add those. 1-wire sensors with precision reading seem to be the obvious choice.
In…
andig updated
2 years ago
-
Issue to track the SHT3x sensor implementation.
I was also thinking about extending the TempHumid plugin to support temperature-only sensors - what's your opinion on that (eg ds1820)
-
## I'm submitting a ...
- [ ] feature request
## Report
If there isn't already a check like this in place, I would suggest checking for a minimum level of stability in the measurement before …
-
I have an issue with IR thermometer readout of the basking spot - when the lizard will go there sensor will measure avarage temperature of the rock and the lizard together dropping down the value and …
-
## I'm submitting a ...
- [ ] bug report
- [X] feature request
- [ ] support request => Please note that this repositories issues are intended for feature requests and bug reports.
## …
-
Hi,
Are the pin mappings from variant_pins.c up to date?
I have the Olimex NB-IoT devkit Rev B and I have connected the DHT22 sensor's data pin to GPIO 1 (according to this schema - https://raw.…
-
Hi @roadsnail thanks for your awesome work so far, I've used your groundwork to update my own code to get Hive running via Zigbee2MQTT and your write up **really** helped with that. I found that the …