-
```
Traceback (most recent call last):
File "test.py", line 9, in
i2c = busio.I2C(frequency=400000)
TypeError: __init__() missing 2 required positional arguments: 'scl' and 'sda'
```
So…
-
Hello,
I use owfs to controll a few modules with ds2408 in them. I wrote a python script to read the PIO.ALL and send it to mqtt. When a mqtt arrives it writes to the corresponding PIO.X (0-7). Tha…
-
Would there be any difficulty adapting t-m to use a genuine i2c bus master (DS2482-100)?
There are a couple I have in mind:
AB Electronics
https://www.abelectronics.co.uk/p/76/1-wire-pi-zero
and…
-
> The device type UniPi Neuron has a i2c-to-one-wire converter built in. It is a DS2482 connected to raspberry pi i2c-1 port. the dt overlay is available at /mnt/boot/overlays and also activated in th…
-
Hi Rick,
Can you supply some links for purchasing the various DS2482-X00 breakout boards. I'm struggling to find them.
Thanks, Brett
-
@gauteh to summarize:
- I think the DS18B20 coated in epoxy are better / more robust, I have heard the ones with a metallic casing always end up rusting / leaking
- the DS18B20 code: https://git…
-
Hello,
I intend to use the abelectronics DS2482-100 interface board with owfs for managing DS18B20 temperature sensors. The following was tested on Pi 2 with Buster light, Pi3+ and Pi4 with Buster …
-
**Is your enhancement proposal related to a problem? Please describe.**
Querying one ds18b20 sensor takes more than 750ms due to the delay required by the sensor for the internal ADC conversion to co…
towen updated
3 months ago
-
I am using Platformio on VisualStudioCode and I have downloaded your OneWire library to my lib folder in my project. I just can't seem to figure out how you link to your library? Should my program ref…
-
**What's the full name of the component you'd like to see in Adafruit.io WipperSnapper?**
DS18X20 (basic support is included already)
**What type of component is this (i.e.: Pin, I2C)?**
1-wire
…