-
Hi Werner,
I've noticed a bit annoing behavior in FR34: it sometimes does not start compressor, when connected over 12V power. It gets then into strange state: the fan is working, power indicator s…
-
Contrary to the description, the status of dc/ac_output_on cannot be queried.
MQTT Explorer does not show me any values. ( I use Bluetti AC200M )
state
device_type = AC200M
serial_number = xxxx…
-
How is the Bluetooth behaviour of ESP32 if no device found or connected .
Is it right that if no Bluetti device is found or not connected that we have to wait until new reboot is automatically initia…
-
Compiled lastest code from today (FW in WebUI 0.1.0), still no retry if first Wifi isn't connected after boot for EB3A:
```
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0,…
-
It would be nice to have some of the 'keep-alive' commands. At the moment, bluetti will turn off the main board on ~3-4 hours of inactivity. I'm sending a message to switch DC on/off every hour, and i…
-
I have an EB3A that I've been using since version 0.9.0 and it has the following entities in Home Assistant (edit: also, AC input power, not pictured):
![Screenshot_2022-11-12_12-55-31](https://use…
-
Looking at this failure: https://dev.azure.com/dnceng-public/public/_build/results?buildId=323067&view=ms.vss-test-web.build-test-results-tab&runId=6640628&resultId=201899&paneView=dotnet-dnceng.dncen…
-
**Description:**
Following service crashes when we run it with `bal run` (even without sending a request to the `get` method)
```ballerina
import ballerina/io;
import ballerina/xmldata;
import ba…
-
###### Reproduction Steps
1. I have a filtered deck that retrieves a certain group of cards.
2. I long press on the name to bring up the options menu
3. I tap Rebuild. Menu closes but
4. Number …
-
In the mobile app I have the option of turning off the unit completely and yet there is no implementation for it in the AC200M device file.
Looking through the code I can see this control defined f…