-
Hi, first of all thanks for making these parts. It saved me a heap of time. However I've realised that there's a strange bug when putting the ENC28J60 into my design. The RST and SCK are fused togethe…
-
Hello,
I am having the below code and want to send & receive the MQTT messages on arduino UNO + ENC28J60 shield.
```
#include
#include
// Update these with values suitable for your netwo…
-
Hi @d-a-v
I am using ESP12-E with ENC28J60 ethernet module for my tests
I tried to get the date-time with configTime and AsyncUDP (ESPNtpClinent library)
When I am using static IP, my sketch dos n…
-
Hi,
I'm trying to begin webthing with enc28j60. I used your library but, when I start the webthing adapter(adapter->begin();) ESP reboot constantly. Have you ever tried to use these two libraries t…
-
I'm trying to get this running on a WT32-ETH01 has anyone had any luck with this? I get no response on the serial monitor even. I suppose I need to configure the Ethernet pins, but don't know if I am …
-
Is it possible to get this library working on the ATMega1284p? I've been trying for the past few days using the ENC28J60 module with no success. The module works fine with my UNO. I've tried both the …
-
I am using ESP12-E with ENC28J60 ethernet module for my tests
I tried to get the date-time with configTime and AsyncUDP (ESPNtpClinent library)
1. With DHCP everything is OK ( LwIP_Ethernet and…
-
**Is your feature request related to a problem? Please describe.**
The ESP32-S3 chip does not have a built-in MAC and PHY interface, so it cannot support Ethernet functionality directly like the …
-
Es währe sinvoll ein Image und Bootloader zu haben, das über ZBus eine volle netzwerk unterstützung bietet, also DHCP/TFTP. Das würde bei einer größeren anzahl an ethersex geräten sehr viel strom spar…
-
MiamiDX throws the following exception when the Plipbox is powered on after the Amiga is powered on (tested with firmware v0.5, not yet tested with firmware v0.6):
> Miami Deluxe Request
> Error(3…