-
Hey, so I bought a bunch of Si7021 breakout boards with i2c connectivity and didn't read properly that only the sonoff branded 1-wire sensors are supported (https://github.com/RavenSystem/esp-homekit-…
-
### PROBLEM DESCRIPTION
Hi,
I updated my Infodisply to Tasmota 11.1.0. After the upgrade all lot of my files where renamed like this:
With Version 11.0.0 it looked like this:
M…
-
**Detailed steps to reproduce it**
For the Status input "g[n]" and the Service Notification Action "m", Home App will not get the updated status immediately until the App was reopened again.
**JSO…
-
**Detailed steps to reproduce it**
I'm trying to flash device Shelly RGBW2 with following command:
`esptool.py -p COM3 erase_flash`
`esptool.py -p COM3 --baud 115200 write_flash -fs 1MB -fm dout -f…
-
Hi,
Is there any chance to support Sonoff DW2 door, window Contact sensor with ESP-homekit firmware?
https://sonoff.tech/product/wifi-smart-home-security/dw2
If anyone have bin able to flash th…
-
Is frequent non-response a router problem
-
Hi,
After buying "HAA Manager" (iOS) I run autoupdate for my all devices
One of them - "Sonoff SV" - won't finish update. I have yellow screen with HAA Installation
The procedure from issue…
-
Just downgraded to 6.7.2 to verify, using this tip:
https://github.com/RavenSystem/esp-homekit-devices/issues/1485#issuecomment-886011739
I use a contact reed at GPIO 9 as a leak sensor type and h…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…
-
Currently I have a very minimal version of your library running on a Sonoff ESP 8266 Basic switch. That runs absolutely great. The problem is that if I add any more complexity to the inner loop Homeki…