-
hello . i get the esp-rfid to work . it work good maybe 3-4 hours ,, and then the mqtt communication from the unit stop sending. it restarts sending when i restart the unit . have sombody a solution …
-
Do you think that the NXP PN7150 module based NFC tag reader (instead of the PN532 sensor which esp-rfid already supports) as well as an "FPC BM-Lite" fingerprint sensor used in this ESP32-based "Chha…
Hedda updated
2 years ago
-
Hi,
I have an issue with a RDm6300 rfid reader, I have already discussed this topic here
https://www.letscontrolit.com/forum/viewtopic.php?f=4&t=7549&p=43527#p43527
My current setup is:
- wemos …
sa-wo updated
2 years ago
-
The last few weeks we're running out of the space available for the sketch.
The test and dev builds now approach their max size so something has to change.
I think the sets of `normal`, `test` and…
TD-er updated
2 years ago
-
### Board
esp-wrover-kit / esp32dev
### Device Description
Custom Board for IoT-Purposes
### Hardware Configuration
All GPIOs are used up.
SPI-Devices are also connected
### Version
latest ma…
-
Hi, i must have set wrong wifi settings to my official blue esp rfid board.
Is there a way to reset it to factory default? I can´t connect to the board - no way to open the webinterface...
-
Hi,
it seems, that the build in sd card reader of the D32 pro is not compatible with PN5180-NFC. Let us see if it is a layer 8 issue... ;)
Unneeded pins are set to 99.
The following scenarios…
-
Hi. I want to make some small visual changes to web ui but when i edit index.html file and upload it nothing changes ..am i doing something wrong ? thanks for reply
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Wiegand Protocol problem NO UID in version tasmota 11 or 10.1, only works in tasmota 10 in 26bit not 34bit
##…
-
I have a very uncommon device SmartDGM PP-W162 equipped with BL0937 sensor. I've previously flashed it with `normal_ESP8266_1M` - completely normal build. Shortly after I noticed my device contains en…