-
Code version: 4.0
Board: `AI Thinker ESP32-CAM`
Partition Scheme: Minimal SPIFFS
Getting these errors when trying to compile. Guess it's something in the latest arduino core that's changed.
``…
-
### The problem
With
- A AI-Thinker ESP32-CAM
- Using a esp32_camera: component
- Added to Home Assistant
The Camera will always show idle state and only deliver the idle framerate, no matter…
-
I know that the README says that one needs to compile against specific Git Hashes because Micropython changes a lot. Anyways: With Micropython 1.19.1 out and 1.20 coming soon, it would be great to hav…
-
-
**Describe the problem you have/What new integration you would like**
I just got my first two ESP32 CAM modules and was having fun with them. I see the camera is very, set and forget, with no a…
-
Test esp32-cam-v2.0.8 with esp-idf v5.2.1-485-g9b3ae86417.
Enable "psram mode" by setting xclk_freq_hz = 16000000.
Then I got below panic.
Note: it works if setting xclk_freq_hz = 20000000.
``…
-
### The problem
Camera snapshot service requests new image, but saves last sate image instead of waiting for new/requested image.
To replicate point camera at phone with timer running, trigger sna…
-
### The problem
When you enable the camera on the I2C bus the scan will detect all the I2C devices yet only the Camera seems to optimizes the bus and no other devices respond.
ssieb pointed to t…
-
Thanks for this great piece of work!
I have a single client behind my esp32_nat_router. It is an esp32-cam with esphome firmware and a fixed IP of 192.168.4.121
Via serial console I do a port ma…
-
Using a ESP32-S3-EYE and I just updated to 1.1.0 but it won't stay running more than a few minutes before the green status light rapidly flashes, and the camera disconnects from wifi.
I'm getting "…