-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://www.openhasp.com/)
- [x] Update openHASP to the latest version
- [x] Reproduce the…
-
### Is your feature request related to a problem? Please describe.
Although OpenDTU is quite stable, it happens from time to time (OTA updates) that the whole system gets stuck. This requires physica…
-
On a 'freshly unpacked' ESP32-CAM (aka AI-cam) SPIFFS OTA upload is not working, Arduino IDE says 'No response'.
Steps -
- compile ota sketch and prepare data dir
- ftdi upload sketch
- disconnect…
mozgy updated
4 years ago
-
Hello,
We are using your code for OTA, smaller file size as your example, works , but Our code size is about 998368 bytes, after 10-30% fail . Sometime at 90% OTA Fail.
OTA Fail Reason :
NO E…
-
I don't know if this is related to the breaking change that is mentioned in a different issue. However, I cannot update to 2024.7.0. If I try to update I get the following error.
> INFO ESPHome 20…
-
### The problem
I tried flashing a ESP32-POE-ISO-EA as a bluetooth proxy using the web installer. The flash succeeds but then the device starts to boot loop. If I go back to the older yaml that I was…
-
Hi,
I installed the script on the ESP32 board and added it to Home Assistant.
And... how to start pairing with the lamp?
I turn on the lamp and press the pairing button on the remote control.
How …
-
Hi,
TLDR: I always get Failed to connect to ESP32: No serial data received.
I have tried flashing the device with two CH340G and also from a Raspberry Pie 4. I did not succeed.
Power have been…
-
# Purpose
Uploading new firmware via OTA (Over-the-Air) using Wi-Fi connection rather than serial communication is extremely useful, especially if there is no physical accewss to the ESP32 board.
…
cjinn updated
3 years ago
-
### The problem
My Qingping Air Monitor Lite cannot be added to HomeAssistant.
I have installed a Bluetooth Proxy on an ESP-32, and then adopted it via ESPHome. I notice an iBeacon integration -…