-
#### Description
SAI errors setting up tunnel maps in the l3vni case. A purely l2vni setup works. This is running off of the 202106 branch with a couple of local unrelated diffs added. The riot…
-
Used OS: Debian 10 (On all ends)
Used FRR Version: 7.1 (via deb repo)
I don't know if this is a bug. My plan was to use BGP EVPN for VXLAN via a multihop BGP session. On my exporting router I chan…
-
When I configure vrf mapping vni,it returns error log like " vni should be mapped by vlan firstly", that means the l2vni and l3vni must be the same.
But I think the l3vni should be independent of vl…
-
https://github.com/ipspace/netlab/blob/eb60af9f0691ff35ba3cd238717170cf21e2651f/netsim/ansible/templates/vlan/dellos10.j2#L8
See https://www.dell.com/support/manuals/en-in/dell-emc-smartfabric-os10…
-
#### Description
I created a P2P Vxlan tunnel between 2 sonic switches using the Loopback interfaces as SRC and DST, but it didn't work.
I found out it was because Sonic by default creates iptab…
-
### Enhancement summary
Adding this issue to track all of the changes for adding full IPv6 support to AVD.
This includes:
- [x] MLAG Peering
- - [x] mlag_peer_address_family
- - [x] mlag_peer…
-
# 稳定又好用——RouterOS+OpenWRT旁路由家庭网络 | 雪糕博客
大家好,最近想了想决定在博客开辟“网络方案”的板块,结合博主我所熟悉的MikroTik、H3C、华为等商用设备以及基于Linux的网络系统(如常规发行版Linux、VyOS、OpenWRT),为大家推
[https://blog.xuegaogg.com/posts/1952/](https://blog.xueg…
-
Here is EPVN type 3 route parsed result
```
json { "exabgp": "4.0.1", "time": 1726195244.60685, "host" : "CXLabs-UBUNTU22", "pid" : 397134, "ppid" : 394161, "counter": 634, "type": "update", "neighb…
jibwf updated
4 weeks ago
-
2.9.3 ansbile 使用ce模块重复操作(比如反复创建vlan10)log 中change仍然为TRUE,update为空。不知道是什么原因
我在测试test_ce_vxlan_gateway.yml
TASK [set dfs source ip vpn, again] *******************************************************…
-
---------------
[x] Did you check if this is a duplicate issue?
[x] Did you test it on the latest FRRouting/frr master branch?
**Describe the bug**
Hello, not sure if it's a bug or simply someth…