-
Combined entities when a flow is positive/negative are not treated as inward/outward flows on flow-card respectively.
Negative flow on grid should show feed in from either battery or solar but it s…
-
Hi,
I am new to github and not familiar with python nor programming. I ran FroniusSmartmeter service installed through setup helper over 2 months without problem. After updating to venus 2.93 servi…
-
### Describe the bug
Today i added my PV setup.
Sometimes i get the following error in the Webinterface:
Unexpected token '}', "{"":}" is not valid JSON [{"":}]
### Steps to reproduce
Today i a…
-
### Describe the bug
i have two inverters.
One goes offline in the evening, the other is handling the battery and therefore always online.
If my Symo 8.2 is offline evcc won't start and throw the…
-
Hi,
I‘m using v1.05 of the adapter. I could not find a value for the following two:
Power consumed from grid today (until now)
Power send to grid today (until now)
Example shown on fronius we…
-
This is such a great project! Thank you for all the hard work!
Unfortunately, after updating via opendtu-*.bin both my hoymiles inverts dont show any more data in venus os ( V 3.00-18).
Data is sh…
-
Hello Henne,
Thank you very much for this extremely useful and simple driver! It was possible to integrate Ahoiy without any problems.
So far I have used [dbus-mqtt](https://github.com/freakent/db…
-
The output in the console alternates between "not connected" and just "w".
This directory is not present so i get not output there.
svstat /service/victron-dbus-fronius-smartmeter
The IP is det…
-
Ich gehe davon aus, dass die Fronius Symo - Serie noch nicht implementiert ist? Ich hätte ggfs. den Bedarf meinen WR entsprechend auszulesen in einem Intervall zwischen 10-30s. Aktuell lese ich ihn mi…
-
Hello and thank you for this integration !!!
I have 2 Fronius Symo connected in daisy chain and a Fronius smartmeter. I set up this integration 3 times, for slave 1 and 2 as the inverters and 240 …