-
Hi,
I'm using the Kiosk mode to read data. And it seems that since 11-MAY-24 18.15 the total energy is no longer updating.
Below the link to my kiosk.
https://uni001eu5.fusionsolar.hu…
-
Hello,
I'm struggling to setup my system in HA, having a double inverter, one linked to a battery, the other to the Power Sensor and the other 2 batteries.
In configuration.yaml I did as follows:
`…
-
### Describe the issue
After updating the firmware of the inverter tonight, the integration suddenly stopped working. I've also updated the dongle and the MBUS firmware, but between those and the inv…
johnp updated
3 months ago
-
### Describe the issue
When using FusionSolar & Dongle the Inverter works fine. When using this integration I am unable to effectively use my PV/battery storage due to:
``Grid-Connected, Grid c…
-
**Describe the bug**
Some sensors returns to the previous value at midnight.
* Are you using the latest version of Home Assistant?
Yes
* Are you using the latest version of this integration?
…
-
Hello,
I see this error in the log of HA:
> 2024-06-26 10:15:43.697 ERROR (MainThread) [homeassistant.components.sensor] Error while setting up fusion_solar platform for sensor
> File "/config…
-
**Describe the bug**
Now that #178 is fixed, my HA is receiving kiosk data again, but every received data point overrides the previous, which means no history is being build.
So eg the real time …
Nabys updated
3 months ago
-
I am obtaining this error after create the client, some idea?
-
### Describe your feature request
Writing in the right Modbus Adress, to control the maximum power injected by the inverter in the Grid network.
It will be useful to limit the yield when the energ…
-
### Describe your feature request
**Negative House Load** (for my setup NOT possible) - potentially due to Poll/Timing mismatch between `Inverter Active power` and `Power meter Active power`:
**…