-
**Description**
Observed that some kernel modules are not being loaded in the latest kernel `5.15.34-v7`.
So I have built a `core-image-base` with the tip of the master (`0135a02`) and while t…
-
**Note on Bugs**
I am running bmc image (details below) and trying to access the sd card attached to the board. However when i type in fdisk -l , it shows nothing. If i look into the dmesg, i see not…
-
Hi,
I connected some printer, usb-mitm started but transmission stopped after few seconds. Could some one take a look and check what's wrong? I added some extra logs. I'm running it on NanoPi NEO
…
-
Hi,
I'm trying to make USBProxy work with dummy_hcd.
I'm using Ubuntu 14.04 which runs a 3.13 linux kernel.
I built the gadgetfs and dummy_hcd modules:
```
apt-get source linux-image-`uname -r`
cd li…
matlo updated
2 years ago
-
Can't get passed segmentation fault after connecting the Beagle to the pc:
Steps to reproduce:
Grab a d-link ethernet to usb converter ("D-Link USB2.0 Fast ethernet Adapter" DUB-E100),
Windows 7 mech…
-
I have installed and tested the awesome project. It work fine with keyboard and mouse, although a little slow.
However, it is not so lucky with thermal printers. Here is the output:
``` sh
Loading …
-
I have a raspberry Pi 3 which has enough ports for hooking up. Can we use another single board computer (like raspberry pi) instead of beaglebone?
-
Hello everyone,
just wanted to let you know that I've successfully used `usb-mitm` on an ODroid C2 running the standard 3.14.79-117 kernel (with gadgetfs/inode.c patch applied). Thanks for this awe…
-
Im running the latest release img on a beaglebone black rev c and it works well when connected to a Windows machine, but the mouse is almost unusable on Linux or OS X machines, any idea why this could…
-
I have been try to get USBProxy to work on a Raspberry Pi Zero W without a lot of success. I am using the on board USB for the gadget port and a MAX3421E for the host port (similar to Raspdancer 21).…