-
Let's continue the discussion with @coddingtonbear from #685,
we have Travis working in bCNC project. What are the possibilities? I want to implement following:
- automatic .exe build using travis…
-
Changes
1. 4th axis was added (tested)
2. grbl.h issue#36 (not tested)
3. main.c issue#38 (tested)
4. planner.h issue#41
5. probe.c uint16_t probe_invert_mask
6. serial.c, serial.h, usb_endp.c i…
-
**Issue by [dkhughes](https://github.com/dkhughes)**
_Wed Sep 7 19:25:39 2016_
_Originally opened as https://github.com/machinekit/machinekit/issues/1055_
----
Other issues address the problem of …
-
I'm just wondering if anyone have any thoughts on how ?
Or if there are other feasible remote gui's for the mksocfpga platform ?
-
From the [scope naming guidelines](https://www.sublimetext.com/docs/3/scope_naming.html#meta):
> The entire scope of a function should be covered by one of the following scopes. Each variant should…
-
To support rebasing 9axis_pull branch onto current upstream MarlinFirmware/Marlin/bugfix-2.0.x
Have I configured Marlin-9axis_pull for 8 axes
And tested with a Dummy hardware shaft.
All functions…
-
Hi,
I have had a couple of gear prints that fail get bad print results when using OcotPrint. The same gcode in repetier via a pc works perfectly without any small stops or hesitations in the movement…
-
hi @Markus , I'm working on the 3d printer board which its serial pins connected to serial pin of ESP module. , in the module couple of html page store in its flash , these file send g-code lin…
-
Afternoon all! This is partly to describe how I have gotten spindle synch to work for myself, and partly to see if its 'correct' and maybe get some input on the matter.
**Mode 1:** When G95 is ac…
-
What are you using Grbl for? I'd love to see how Grbl is being used by everyone, as I have absolutely no clue. This would be tremendously useful in determining the future for Grbl and what we should p…