-
An earlier attempt at this is in the [gr-fec-rs](https://github.com/daniestevez/gr-satellites/tree/gr-fec-rs) branch. Since then, the Reed-Solomon blocks in gr-satellites have been refactored. This en…
-
To produce a spectrum display (waterfall), one performs the FFT on successive windows of the input signal. For higher time resolution, especially on low-sample-rate signals, it may be desirable for th…
-
Move the reconstruction into the GNU Radio process, called like a library from the work function
This should slightly improve performance, and allows Windows compatibility
- [x] Adjust interface…
-
Not sure if you're still interested in maintaining this or care, but from what I can tell it's not working for GNU Radio 3.7. I hear they switched some APIs or something (I've never written anything f…
-
I have used pybombs to install gnuradio and gr-baz packages.
When the RTL-FM example is loaded there are a number of missing blocks; it is not obvious what needs to be installed in order to make these…
-
In the readme there is a very short line about:
"Then upsample them with the GNU Radio flowgraph. It's important to set the ppm variable with the value of your dongle, see the main README.md for deta…
-
### What happened?
[`wavfile_sink.h`](https://github.com/gnuradio/gnuradio/blob/v3.10.3.0/gr-blocks/include/gnuradio/blocks/wavfile_sink.h) still says
https://github.com/gnuradio/gnuradio/blob/d2…
-
Hi,
Dunno if it's the proper place for such request, but here goes.
I'm following the guide on how to install gr-limesdr on my GNU Radio installation: https://wiki.myriadrf.org/Gr-limesdr_Plugin…
-
Hi Dani,
Just upgrading to gr-satellites 4.0 and GNU3.9. Fortunately, gr-osmosdr now compiles using GNU 3.9. Looks great with a few glitches. :-)
[error.txt](https://github.com/daniestevez/gr-sa…
N6RFM updated
2 years ago
-
Hi. I've been trying to get the cariboulite working on a raspberry pi 4 (i have several pi4's and run into the same issue on them all) and i've been having some struggles with the smi interface. I a…