-
I also have a diesel heater that can be controlled via Bluetooth via the app. What hardware do I need so that the home assistant connects to the heating? an ESP32? ESPHome? Thank you very much for thi…
-
### Problem description
Hello
I just bought a zigbee heater, the Acova Alcantara.
I can pair it to ZHA and get entities but there is a "bug".
If I change the temperature using ZHA, the heate…
-
### The problem
Attributes min_temp and max_temp get set to the current_temperature every time device refreshes, making it impossible to control the heat pump with climate.set_temperature in automati…
-
If the Due is not powered but RAMPS-FD is, then the heater outputs (D8-D11) default to an on state.
Redesign FET control circuit to ensure that heater outputs are not active is Due is not powered.
bobc updated
10 years ago
-
Users suggest:
- [ ] Mouthpiece preference (this might require some nuance if devices include multiple mouthpieces, or don't have a mouthpiece, like bong-only DHVs)
- [ ] Oven material
- [x] Air …
-
Hello,
I'm using water heater with schedule, created by Econet native android app.
At the same time I would like to have possibility to control water heater via HomeAssistant.
Problem is: when I s…
-
Can you please rename in fluidd interface:
Fan 0
Fan 2
Fan 3
to something meaningful?
_My understanding is that:
Fan 0 - part cooling fan
Fan 2 - Rapid Cooling / Auxiliary fan (in chamber, …
-
Hi @vitotai
I just upgraded to 0.5.
While doing a test run, I noticed an issue with the sparge heating control:
After reaching temp for mash step 1, the sparge heater kicked in as expected. When I…
-
### Is your feature request related to a problem? Please describe.
Solid state relay(SSR) based heater.
Brief:
1. SSR based heaters work directly from mains voltage 50Hz or 60Hz
2. SSRs usually …
-
Two of the sensors randomly stopped showing / being available recently, the spa chlorinator salt level and spa chlorinator setting. Additionally, reviewing the GitHub it seems I should be able to con…