-
Links like so not being fixed, at least at docs.google.com/spreadsheet
ghost updated
6 months ago
-
I am running offline joint space planning for a delta robot using ruckig. For a pick and place path we are plotting the vertices and using ruckig to generate the motion plan for individual straight li…
-
### What happened
V-core 4 500mm hybrid setup, when configured to work as hybrid some stepper motors do not move. Y axis works fine, while X axis rotates only left side steppers. Thus toolhead moves …
-
As a subissue of https://github.com/machinekit/machinekit/issues/586 I'll try to get history, questions, contemplations, answers, tips and all what passes collected into this issue.
During the proces…
-
The format for the vehicles that need to go into shared is incorrect. The format for qb-core is like this
{ model = 'riot', name = 'Police Riot', brand = 'Brute', …
-
I must admit I was very sad when I received my S42Bs and they didn't work well (display issues, skewed prints, steps missing, ...). At the time fixes for said problems were not available on this githu…
-
### Is your feature request related to a problem? Please describe.
This feature request, or better first Request for discussion, is related with the issue described in https://github.com/MarlinFirm…
-
I would like to use the [BigEasyDriver](https://www.sparkfun.com/products/12859) to drive a stepper motor from the Arduino.
I've chosen Cylon over Johnny-Five because, although newer, I believe Cylon…
-
Hi,
I've been debugging using your code on IHMO3A1. I wondered why you set TIM2 running straight away and then used a global to keep track of whether GRBL needs step pulses created.
```
TIM_…
-
GRLB1.1
MKS DLC32 v2
pc, W11- bCNC, laserGRBL 5.01, Candle, grblControl etc.
Sending Gcode with M5 or M30 at end of file stops cnc machine before the job done. Tested with several different sende…