-
I was trying to get the speech recognition examples to work with two MEMS microphones in `I2S_SLOT_MODE_STEREO` mode, but all of the available examples are set to use a single mic in `I2S_SLOT_MODE_MO…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
When I installed pulse audio, and done all steps from tutorial my mic is not working. All services are green, but wakeword is not working at all. It was working before when I setup basic wyoming-satel…
-
I am using a rpi 2 with the add-on IQaudIO sound card.
This has a DAC that connects to the rpi2 using i2s.
I wanted to add the Adafruit I2S MEMS Microphone to this setup.
After building the my_load…
nivw updated
7 months ago
-
Regarding discussion on microphone array vs i2s mezzanine started here: https://github.com/96boards/mezzanine-community/issues/64
I have been thinking about a microphone array with respect to the i…
-
I installed your prebuild firmware with the I2S module on a M5Stack ATOM Echo and I then tried running the examples from:
https://github.com/lemariva/uPyM5Echo
The play back example worked, thou…
-
Since I am using ESP-EYE which uses MSM261S4030H0R microphone, and according to datasheets it has 24-bit depth in a 32 bit wordk. So in `i2s_init()` I change the :
```
i2s_config_t i2s_config = {…
-
Hello,
When i try to play a mp3 file with a automation thats reacts to a spoken command, the esp crashes.
When i send it over Services it works well without crashes. When i trigger the command i…
-
[Pulse Density Modulation PDM](https://en.wikipedia.org/wiki/Pulse-density_modulation) is common on digital microphones. Would be a good addition to compliment the I2S support that is already availabl…
-
Example "Examples/ESPHome/6-VariousFeatures" does not compile with recent esphomes.
New "calibration" format for the touchscreen is easily resolve by:
```
calibration:
x_min: 280
x_ma…