-
### What happened?
Device IKEA LED2201G8 (firmware 3.0.10) goes in pairing mode or in "power on behaviour" every few minutes.
After a while, device is no more present in the Devices List.
### What …
-
### The problem
Ikea / Aqara Buttons connected via Matter (Dirigera / M3 Hub) send data on home assistant startup with no buttons pressed. Thus lights turn on startup/restart of home assistant.
I ha…
-
Hallo,
ich bin kürzlich zufällig über HVL gestoßen - schicke Sache, wäre ein Weg um meine Tradfri-Rollos einzubinden.
Ich habe also das Plugin 0.0.11 in meiner Raspimatic 3.57.5.20210525 install…
-
I am using Node-red-contrib-ikea-home-smart node which is based off node-tradfri-client. When I set it up it works as it is supposed to, but after it have been running for a period of time (hours), th…
-
If the polling feature is enabled, the Tradfri hub eventually looses connectivity and needs a reboot to get back to work again.
-
Thanks again for your great work and sharing @meg768
I noticed that the state of the blinds is "closing" even if they are 100% open.
"accessories.control.label_closing": "Beim Schließen"
I wou…
-
Hi
After moving my program using node-tradfri-client to another vlan/subnet. It is not able to discover the ikea gateway anymore(it still works when program and gateway are on the same subnet)
I…
-
Hello,
would it be possible to also receive the events from the devices (e.g. light was turned on/off) without having to check the status?
Like the "observe device" in the old Tradfri implementation…
-
I paired an Ikea E2213 shortcut button and two E2002 remotes via a Phoscon Conbee II with the zigbee adapter.
The devices seem to be identified correctly, but the battery state and the states for bu…
-
Hi, the group feature is great. But it don't get how exactly to group the bulbs in one group. Is there a "addDeviceToGroup(deviceId, groupId)" method? Thanks for the great library.