-
In some of the documentation it mentions using PCBway for the touch panel, and jlc for the rest, is there a reason for this? I would have assumed they both produce boards with the same functionality, …
-
Issues noted from first batch of PCBs from JLCPCB:
- Chip identifier silkscreen text missing - was it on the right layer, was the same on another layer? Might be the library.
- Could have a smaller …
-
I have a problem where when using slime to send any text to an iPython shell, the `%cpaste -q` gets sent but then the console gets stuck. The only way to get out is with ctrl-c and then I get this err…
-
Rearrange the github structure to match the kicad docs so the plugin can be added to the Content Manager
https://dev-docs.kicad.org/en/addons/
-
Thank you for Open-Frame1, it seems very exciting. I think the PCB ordering process is confusing for new users, so some additional info here would be a big help. The build guide video in the readme do…
-
Hi @coseyfannitutti I'm writing to you because, as per subject I'd like to build the Discipline v2 by myself but by being completely new to the hobby, I'm not quite sure where to go to get the parts m…
-
jlc -DNDEBUG -Jinv -Jdne -Jivt -Jinv -Jdne -Jinv -Jdne -Jcne -Jdne -Jpll -Jinv -Jdne -Jurl -Jinv -J=print-cne-stat -J=print-dne-stat -J=print-inv-stat -J=print-ivt-stat -J=print-pull-stat -J=print-un…
-
**EDIT:** Looking at the pictures of the boards a little more closely I see that they were panelized so that a few could be printed on a single PCB and then broken apart. JLCPCB has a panelization o…
-
@mck1117 says "one idea I had for a test board I had: wire buttons to the analog inputs, and LEDs to outputs. Write firmware that just reads inputs and writes them to each output, That way you can j…
-
Stamped case has this area in the middle which interferes with the lower two caps
Minir hammer mod helps so we need to move just a bit or reduce caps height?