-
**Environment**
Zephyr version: 2.5
Target: NRF52840
**Bug description**
Just after registering a service, UART communication is blocked for more than 10ms, causing a communication failure. In t…
-
This comment is a bit confusing to me when read with the one above.
Most of the RSSI's in the tests are changing to 30.
These two are the outliers, and I don't understand from the comments why they'…
mikev updated
2 years ago
-
Edit note: initial Bugreport mixed up ports. I initally wrote port 8080 but it was port 8000 all along.
What happened:
On the Web-UI I wanted to add a NetworkServer. names "testns" and Network-ser…
-
Any thoughts on supporting SX1303 with USB?
I want to use the RAK5146 with SX1303, LBT and GPS - which only comes with USB (SPI version does not support Listen Before Talk, probably because of being …
-
Hi Bernd, I hope you're fine.
I am working on ESP32 Sx1262 LoRaWAN on Arduino Plartform and first of all I has tried to connect EU868 and I have successfully sent the package. Then I changed the re…
-
### Prize Bounty
1st : $500
2nd: $200
3nd: $100
### Challenge Description
Currently [each admin has to manually check in each attendee](https://medium.com/wearekickback/kickback-event-orga…
-
**Summary:**
Inspired by this great new initiative (https://cep2030.org) this thread is focussed on discussion around how to include circularity by design.
**Why do we need this?**
We need to wo…
-
#### Description
Just a pointer that there is a minimal [SCHC](https://datatracker.ietf.org/doc/draft-ietf-lpwan-ipv6-static-context-hc/) implementation [here](https://github.com/imec-idlab/libschc).…
-
With the new POC11 , AS923 countries would have an issue . Lora alliance set up the default EIRP of AS923 to 16dbm.
But different Asia countries has set the max EIRP to around 26-27dbm.
Singapore…
-
#### Description
Test code for sx127x driver runs on board, but cannot setup frequency.
#### Steps to reproduce the issue
We compiled the code and flashed it to my stm32f0discovery board. I…