-
Currently only the 2-channel MCP3202 is supported. Add support for the other models, since they aren't 100% compatible.
- [x] 1ch
- [x] 4ch
- [x] 8ch
-
**EDIT**: In your [documentation](https://wiki.seeedstudio.com/ReSpeaker_4_Mic_Array_for_Raspberry_Pi/), to which your readme also points, you are referencing a different git repository: https://githu…
-
Package name: PyQt5
Issue type: Missing package
Link to PyPI page: https://pypi.org/project/PyQt5
Link to piwheels page: https://www.piwheels.org/project/PyQt5
Version: all
Python version: all
-
### Describe the bug
Not really sure if this is the bugbase. Please advise if I need to file this issue somewhere else.
I noticed that on my 32 bit Raspberry Pi OS Lite after doing "sudo apt-get upd…
-
`apt install rpicam-apps` = The following packages will be REMOVED: libcamera0
I use: `gst-launch-1.0 libcamerasrc...` which breaks because:
```
gst-inspect-1.0 libcamerasrc
Filename …
-
In NixOS 21.05, the ``hardware.deviceTree.base`` option can no longer be used. After trying to do some research, I figured out that the lines that I was using successfully:
```
hardware.deviceTre…
-
Hello,
I try to clone my SD card to a SSD disk (Argon one case with the SSD adapter). But when I run rpi-clone I got the bellow error message. When I try to boot of the SSD only Pi will not come up…
-
Hi
I have tested 0.2.0 on the 3201 and ESP32 using HSPI but I keep getting rollover values when ADC-IN is at half of Vref (3V3 in my case)
So the values goes from 0-4095-0-4095 when doing 0-3V3 on A…
-
### Describe the bug
Building device tree blobs with "ARCH=arm64" option causes errors.
### Steps to reproduce the behaviour
$ make ARCH=arm64 bcm2711_defconfig
$ make ARCH=arm64 dtbs
### Devic…
-
Hello @qnlbnsl , i've tried to install it following your instructions. At first i struggled with general update problems (forgot to sudo apt update/ upgrade before executing your script, problem with …