-
Pushing sensor data to Influxdb using the Generic HTTP Advanced Controller causes constant reboots. The functionality works, but every now and then, typically in the order of minutes apart, an error o…
-
やること
- [x] table構成見直し
- 気圧温湿度(enviraonment)テーブルと同じテーブルにCO2を追加するか、テーブルを分けるか
- 分ける。楽
- **バックアップ取ってから作業する**
- `schema.sql`
- [x] mh_z19から値取得&DB登録処理用プロセス(①)作成(.py)
- [x] `publisher_…
-
Compiling for an esp32c3 board, I have some issues with platfomio, like this:
C:/Users/Usuario/.platformio/packages/framework-arduinoespressif32@src-01b2ee0664276ec022da2783d94579c3/tools/sdk/esp32…
-
Good Morning all.
The current mega version is not really working yet.
Board Wemos D1 without external hardware compiled with Arduino 1.8.5.
I get:
19802 : WIFI : Connected! AP: SMC (C8:0E:14:05:…
-
Hi, I used your example script on my new (and first) MH-Z19B sensor. I have no experience with this type of Sensor, however i do not trust this temerature measurements:
`CO2 (ppm): 1962
Temperature …
-
### The problem
I see the following in my logs:
```
Platform esphome does not generate unique IDs. ID 8caab5c0c1e2-wifisignal already exists - ignoring sensor.house_energy_meter_wifi_signal
Plat…
-
> nodemcuWeatherAtHome:75:37: error: call of overloaded 'MHZ(const uint8_t&, const uint8_t&, const int&)' is ambiguous
> 75 | MHZ co2(MH_Z19_RX, MH_Z19_TX, MHZ19B);
> | …
-
Hi,
i wrote this to the MH-Z19 library (by [WifWaf](https://github.com/WifWaf/MH-Z19/issues/49)) my issue first, but without any reasonable result (signals look good, checked with oscilloscope).
…
-
Hello there,
thank you for providing the modules for the MH-Z19!
Using the mh_z19 python module works
```
pi@co2sensor:~/mh-z19 $ sudo python -m mh_z19 --all
{"co2": 1845, "temperature": 19, "TT"…
-
### PROBLEM DESCRIPTION
When powercycling or resetting the device, it will need 3 minutes for the "preheat" before the MHZ19 will report valid data. Also see https://www.winsen-sensor.com/d/files…