-
I'm not sure is this installer problem or partition manager issue, however after reformating partitions and creating
software raid 10, md1 device started resyncing and then this problem occurred and…
-
(I am only half joking here)
The keyboard has an upgradable firmware and a documented microcontroller:
https://support.lenovo.com/us/en/documents/pd026745
http://www.sonix.com.tw/article-en-1002-3048…
-
### Board
ESP32-C3
### Device Description
custom board with ESP32-C3
### Hardware Configuration
rotary encoder connected to GPIO 0 and 1 with 100k PULLUP resistor connected to 3.3v
### Versi…
-
Hello! I wonder if there is a possibility of adding this feature? Because in some cases FFB is too strong, and the power supply ends up shutting off.(mostly on beamng or iracing colisions) I know that…
-
Hi Benoît,
This code is such a good idea to start with. Thanks for the great work.
I'm using your library to open and parse a _settings.json_ file that gets created by PHP on my Yun via an HTML inp…
med44 updated
7 months ago
-
ArduinoHA Library Is an excellent library. I Use the library on multiple device and it work very well.
I run in an issue with my last project:
Nature of the projet:
The project is to control two …
-
I have finally begun with a REMOTE_AUTODETECT :-)
For now it will assume the six bldc pins to be
```
#define BLDC_GH PA10 // green
#define BLDC_GL PB15
#define BLDC_BH PA9 // blue
#defi…
-
Hello,
I am trying to program the [IceSugar-pro](https://github.com/wuxx/icesugar-pro) board. That uses the ECP5 FPGA.
I have encountered several errors.
First, `unable to open ftdi device: -3 …
-
### Describe the Bug
I'm new to qmk and C, and I'm trying to make custom firmware for a 12 x 4 key handwired keyboard (with an Arduino Micro with an atmega32u4). But it's giving me these errors while…
-
Hi,
First, thank you for your hard work. The firmware works perfectly for me -- I managed to build it for the Mega using [EsGeh's pull request](https://github.com/TheKikGen/USBMidiKliK/pull/7).
…